EXTREME PRESSURE GREASE
They possess the basic properties of MULTIPURPOSE and INDUSTRIAL GREASES but are designed specifically for use under the most severe conditions of loading both in automotive and industrial services, where conventional greases would be unable to prevent destructive wear of the working surfaces.
FEATURES
- Excellent load carrying properties.
- Good resistance to water washout.
- Good rust & corrosion protection.
- Long service life through excellent oxidation stability.
- Good mechanical stability.
- Enhanced protection under severe heavy-duty, low-speed operating conditions.
Extreme Pressure Grease 0 – PDS Extreme Pressure Grease 1 – PDS Extreme Pressure Grease 2 – PDS Extreme Pressure Grease 3 – PDS
| NLGI NO. | 0 |
| Appearance | Homogeneous, Amber |
| Texture | Smooth |
| Soap Base, Type | Lithium Soap |
| Penetration, Worked, 60 Strokes (ASTM D 217) | 355 – 385 |
| Unworked (ASTM D 217) | < 385 |
| Worked 10,000 Strokes | <385 |
| Dropping Point, In °C (ASTM D 566) | min 180 |
| EP performance test Weld point, kgf ( ASTM D 2596) | 200 min |
| Copper Corrosion, 24hrs at 25oC (ASTM 4048) | Pass |
| Water washout in % at 100ºF (ASTM D 1264) | 3.5 |
| Water washout in % at 175ºF (ASTM D 1264) | 10.0 |
| Four Ball Wear (40 kg, 1200rpm, 75oC, one hour)Scar diameter, mm (ASTM D 2266) | 0.5 |
NOTE: The test data shown in this table are recent average values and are subject to usual tolerances.
EXTREME PRESSURE GREASE
They possess the basic properties of MULTIPURPOSE and INDUSTRIAL GREASES but are designed specifically for use under the most severe conditions of loading both in automotive and industrial services, where conventional greases would be unable to prevent destructive wear of the working surfaces.
FEATURES
- Excellent load carrying properties.
- Good resistance to water washout.
- Good rust & corrosion protection.
- Long service life through excellent oxidation stability.
- Good mechanical stability.
- Enhanced protection under severe heavy-duty, low-speed operating conditions.
TYPICAL QUALITY CONTROL TESTS
| NLGI NO. | 1 |
| Appearance | Homogeneous, Amber |
| Texture | Smooth |
| Soap Base, Type | Lithium Soap |
| Penetration, Worked, 60 Strokes (ASTM D 217) | 310 – 340 |
| Unworked(ASTM D 217) | < 340 |
| Worked, 10,000 Strokes (ASTM D 217) | < 340 |
| Dropping Point, In °C (ASTM D 566) | 180 min |
| EP performance test Weld point, kgf ( ASTM D 2596) | 200 min |
| Copper Corrosion, 24hrs at 25oC (ASTM 4048) | Pass |
| Water washout in % at 100°F (ASTM D 1264) | 3.5 |
| Water washout in % at 175°F (ASTM D 1264) | 10.0 |
| Four Ball Wear (40 kg, 1200rpm, 75oC, one hour) Scar diameter, mm (ASTM D 2266) | 0.5 |
NOTE: The test data shown in this table are recent average values and are subject to usual tolerances.
EXTREME PRESSURE GREASE
They possess the basic properties of MULTIPURPOSE and INDUSTRIAL GREASES but are designed specifically for use under the most severe conditions of loading both in automotive and industrial services, where conventional greases would be unable to prevent destructive wear of the working surfaces.
FEATURES
- Excellent load carrying properties.
- Good resistance to water washout.
- Good rust & corrosion protection.
- Long service life through excellent oxidation stability.
- Good mechanical stability.
- Enhanced protection under severe heavy-duty, low-speed operating conditions.
TYPICAL QUALITY CONTROL TESTS
| NLGI NO. | 2.0 |
| Appearance | Homogeneous, Amber |
| Texture | Smooth |
| Soap Base, Type | Lithium Soap |
| Penetration, Worked, 60 Strokes (ASTM D 217) | 265 – 295 |
| Unworked (ASTM D 217) | < 295 |
| Worked 10,000 Strokes | < 295 |
| Dropping Point, In °C (ASTM D 566) | 180 min |
| EP performance test ( Weld point, kgf (ASTM D 2596) | 200 min |
| Copper Corrosion, 24 h at 25 0C (ASTM D 4048) | Pass |
| Four Ball Wear (40 kg, 1200rpm, 75oC, one hour) Scar diameter, mm (ASTM D 2266) | 0.5 |
| Oil Separation, mass in %w ,18 hrs at 400C (IP 121) | 5 max |
| Water washout in % at 380C (ASTM D 1264) | 2.0 |
| Water washout in % at 1350C (ASTM D 1264) | 9.0 |
| Leakage tendencies In g Deposit on Bearing Surface 6hrs @ 1050C (ASTM D 1263) | 2.5 |
NOTE: The test data shown in this table are recent average values and are subject to usual tolerances.
EXTREME PRESSURE GREASE
They possess the basic properties of MULTIPURPOSE and INDUSTRIAL GREASES but are designed specifically for use under the most severe conditions of loading both in automotive and industrial services, where conventional greases would be unable to prevent destructive wear of the working surfaces.
FEATURES
- Excellent load carrying properties.
- Good resistance to water washout.
- Good rust & corrosion protection.
- Long service life through excellent oxidation stability.
- Good mechanical stability.
- Enhanced protection under severe heavy-duty, low-speed operating conditions.
TYPICAL QUALITY CONTROL TESTS
| NLGI NO. | 3.0 |
| Appearance | Homogeneous, Amber |
| Texture | Smooth |
| Soap Base, Type | Lithium Soap |
| Penetration, Worked, 60 Strokes (ASTM D 217) | 220 – 250 |
| Unworked (ASTM D 217) | < 250 |
| Worked , 10,000 Strokes | < 250 |
| Deposit on Bearing Surface | None |
| Dropping Point, In °C (ASTM D 566) | 180 min |
| EP performance test Weld point, kgf ( ASTM D 2596) | 200 min |
| Copper Corrosion, 24hrs at 100oC (ASTM 4048) | Pass |
| Four Ball Wear (40 kg, 1200rpm, 75oC, one hour) Scar diameter, mm (ASTM D 2266) | 0.5 max |
| Oil Separation, mass in %w ,18 hrs at 400C (IP 121) | 1 max |
| Water washout in % at 1000F (ASTM D 1264) | 1.0 |
| Water washout in % at1750F (ASTM D 1264) | 3.0 |
| Leakage tendencies In g Deposit on Bearing Surface 6hrs @ 1050C (ASTM D 1263) | 2.0 max |